Concrete Coating · DFW Metroplex
Floors That
Look the Part.
Professional concrete coating for garages, patios, and driveways across DFW. Durable, slip-resistant, and built to handle Texas heat.
0+
Projects Completed
0.9★
Google Rating
0-20yr
Coating Lifespan
0 yrs
Serving DFW
Concrete Coating in DFW
Transform Your Concrete Surfaces in 1 to 2 Days
Bare concrete is porous, stains easily, and deteriorates faster in DFW's heat and freeze cycles. A quality concrete coating system seals the surface, adds slip resistance, improves durability, and transforms the appearance of garages, patios, driveways, and pool decks in one to two days. The right coating system, properly installed, lasts 10 to 20 years with minimal maintenance.
True Star handles the complete process: surface assessment, crack repair, grinding and preparation, primer, base coat, decorative system, and clear topcoat. Surface preparation is the most critical step and the one most often skipped by low-price installers. We don't skip it.
Multi-Layer Coating System
Decorative Color Options
Installed in 1-2 Days
2-Year Warranty
Why True Star
What Sets Our Concrete Coating Apart
Surface Prep Is the Job
Concrete coating failures almost always trace back to inadequate surface preparation. We grind the surface to the correct profile, repair cracks and spalls, and apply primer before any coating goes down. This is what makes the difference between a coating that lasts and one that peels.
Coating Systems for DFW Conditions
We specify coating systems rated for Texas heat, UV exposure, and temperature cycling. Not all coating products perform equally in North Texas summers. We use products appropriate for the specific surface and exposure conditions of your project.
Slip Resistance Built In
Smooth concrete coatings become dangerously slippery when wet. We incorporate appropriate slip-resistant additives or textures into every exterior coating application. Patios, pool decks, and driveways all require different slip resistance levels.
Our Work
Concrete Coating Projects in DFW
Expertise
What Separates a Concrete Coating That Lasts from One That Peels
Concrete coating failures are almost always caused by inadequate surface preparation. Coating applied to a surface that hasn't been properly ground and profiled will not bond correctly and will peel within months to a few years. The grinding step is the most labor-intensive part of the job and the one most often skipped by low-price installers. It's also the most important.
Moisture is the second most common cause of coating failure. Concrete that has moisture vapor transmission issues will cause coatings to bubble and delaminate from below. We test for moisture before coating and address any moisture issues before applying the coating system.
Product selection matters significantly for exterior applications in DFW. Coating systems that aren't rated for UV exposure and temperature cycling will chalk, fade, and degrade faster in North Texas summers. We specify products appropriate for the specific exposure conditions of each project.
Ready to Get Started?
Call us today for a free on-site consultation. No pressure. no obligation.
How It Works
How Our Concrete Coating Process Works
Free Consultation
We visit your property, assess the surface condition, check for moisture issues, and discuss coating system options and color choices. We provide a detailed estimate before any work begins.
Surface Prep
We grind the surface to the correct profile, repair any cracks or spalls, and apply primer. This is the most critical step and determines how long your coating lasts.
Coat & Deliver
We apply the base coat, decorative system, and clear topcoat. Most projects are complete in 1 to 2 days. Final walkthrough includes care and maintenance instructions.
Buyer's Guide
Common Concrete Coating Mistakes to Avoid in DFW
Choosing a low price without asking about surface prep
The most common concrete coating failure is caused by inadequate surface preparation. A low-price installer who skips proper grinding will deliver a coating that peels within months. Always ask specifically what surface preparation is included in the scope: grinding depth, crack repair, and primer application should all be specified.
Not testing for moisture before coating
Concrete with moisture vapor transmission issues will cause coatings to bubble and delaminate from below. A simple moisture test before coating begins can identify this problem. If your installer doesn't mention moisture testing, ask about it.
Using interior coating products on exterior surfaces
Coating products designed for interior use are not rated for UV exposure and temperature cycling. Using interior products on exterior surfaces in DFW will result in chalking, fading, and premature failure. Confirm that exterior coating products are UV-stabilized and rated for your specific climate.
Full Service
Everything Handled. Start to Finish.
When you work with True Star, you get a complete team managing every aspect of your project.
Client Reviews
What DFW Homeowners Say About True Star
"I am extremely pleased with the travertine patio extension, complete with brick wall exterior, tongue & grooved stained pine interior with TV, fireplace, mantle and roof extension too! They also provided chop stone borders for three flower beds. The crews arrived daily on time, cleaned up at the end of each day and were easy to work with. Cameron and Eric stayed on top of day-to-day details and were excellent about communicating approvals and updates. I would use TrueStar again in the future!"
Carolyn Bachmann
Frisco, TX
Patio Extension & Outdoor Living
"These guys are the best! They came out quickly to provide an estimate and were so helpful making great suggestions. They knew exactly what I needed to improve my front landscaping. Their work far exceeded my expectations and pricing was very reasonable. They really back up their work and were extremely knowledgeable about what will survive in Texas and in my particular flowerbed lighting. It's been a year now since they planted, and everything is thriving just like they said it would. They even hooked up my sprinkler system to water a large pot in the front so I don't have to hand water. I highly recommend their work!"
Lesa Swimelar
Frisco, TX
Landscaping
"Working with True Star for our backyard landscaping was an incredible experience! From start to finish, their team was professional, attentive, and full of creative ideas that truly transformed our outdoor space. They listened to our vision, made excellent suggestions, and executed everything flawlessly and quickly!! The attention to detail and quality of their work exceeded our expectations, and we couldn't be happier with the beautiful results. If you're looking to elevate your landscaping, I highly recommend True Star!"
Sheela Furqueron
Frisco, TX
Backyard Landscaping
Common Questions
Concrete Coating FAQs for DFW Homeowners
Answers to the questions we hear most from homeowners in Frisco, Plano, Allen, McKinney, and the surrounding DFW area.
Concrete coating installation in DFW typically costs $3 to $8 per square foot installed, depending on the coating system, surface prep required, and any decorative options. A standard 400 sq ft garage floor runs $1,200 to $3,200. Patio and pool deck coatings vary based on size and system. True Star provides a detailed, itemized estimate after your free on-site consultation.
Quality concrete coatings installed with proper surface preparation last 10 to 20 years in North Texas. The key factors are surface prep quality, coating system selection, and UV resistance. Coatings installed without proper surface preparation will peel and delaminate significantly faster.
We coat garage floors, driveways, pool decks, patios, walkways, and commercial floors. Each surface type requires a specific coating system and preparation approach. We assess the surface condition and recommend the appropriate system during your consultation.
Minor cracks can be repaired and coated successfully. Significant structural cracking may require more extensive repair before coating. We assess the surface condition during your consultation and identify any repairs needed before coating begins.
Most residential concrete coating projects take 1 to 2 days. Garage floors typically take one day. Larger patios or driveways may take 2 days depending on size and the coating system used. Cure time before full use is typically 24 to 72 hours.
True Star serves the entire DFW metroplex including Frisco, Plano, Allen, McKinney, Prosper, Celina, Southlake, Colleyville, Flower Mound, Dallas, Argyle, and surrounding communities.
Have a question that isn't listed? Give us a call.
(469) 447-5143Free Consultation
Ready to Transform Your Concrete?
Call us or fill out the form and we will schedule your free on-site consultation. No pressure. no obligation.
True Star Outdoor Solutions
124 Rose Lane Suite 305, Frisco, TX 75034
Explore More
